Solar Engineering & Design
Solar PV engineering, energy-demand assessment, inverter and storage sizing, electrical design considerations and project documentation for Kenya.
Overview
A solar installation should be engineered around the site's electrical demand, practical constraints and intended operating outcomes. Before selecting a panel or inverter, it is important to understand when power is used, which loads are essential and how the system will interact with the existing electrical supply. Solar Engineering & Design covers the technical planning needed to make those decisions clear.
Solutions and technical scope
Load assessment and energy profiling
- Review appliance lists, nameplate ratings, peak demand, daily energy use and time-of-use patterns.
- Identify critical loads, high starting currents, intended backup duration and future expansion plans.
- Assess grid availability, existing supply phase and backup or generator requirements.
Site survey and solar potential
- Assess available roof or ground area, orientation, shading, access, structural constraints and cable routes.
- Consider practical inverter and battery locations, ventilation, environmental exposure and maintenance access.
System architecture and equipment sizing
- Compare grid-connected, hybrid and stand-alone configurations as appropriate to the application.
- Plan PV generation, inverter capacity, battery energy and power requirements, compatible equipment and monitoring options.
- Review cable sizing, isolation, earthing, protection coordination and relevant equipment documentation.
Design documentation
- Define the proposed equipment schedule, basic single-line design approach, installation interfaces and commissioning requirements according to the agreed scope.
How a project is developed
1. Share usage information and objectives through the enquiry form.
2. Agree whether a desktop assessment, measurements or an on-site survey is required.
3. Review suitable system options and technical trade-offs.
4. Confirm the preferred scope, procurement requirements and next steps for implementation.
Applications
Design may be appropriate for homes needing essential-load backup, offices managing daytime electricity consumption, small businesses, schools, healthcare facilities and larger commercial sites. Actual suitability depends on a detailed assessment.
Information to prepare
Provide recent electricity bills if available, a list of major loads, the site location, existing supply details, preferred backup time, photos or drawings and any expansion plans.
Frequently asked questions
Can I size a solar system from my monthly bill alone?
Monthly bills are useful for estimating energy use, but they do not show peak demand, surge loads or when electricity is consumed. An appliance and usage assessment is also important.
Does every solar project need a battery?
No. Storage depends on whether the system needs backup or time-shifting and on the proposed electrical configuration.
Can a design allow expansion later?
Future PV, inverter and battery expansion can be considered, but only within the limits of the selected equipment and installation design.
Next step
Request an assessment describing the site and your power requirements. Any proposed ratings, savings, cost or performance must be confirmed through project-specific engineering.

